rage x wanted

[suffolkmike]

inzer rage x wanted to fit 75kg lifter.

[Funky_monkey]

How big is ur chest? I have a brand new size 44 inzer rage-x that's never been worn. I got it 2wks out of a competition and just used my broken in size 42 instead. Will fit a 41-44inch chest, 15-16inch flexed arms.

[Hellspawn]

Just sold my Inzer Rage Size 44 only tried it on once never liked it

getting rid of this lot though as i got some new secret stuff coming (all my own kit and i only competed once in 2006)

METAL VIKING PRESSER IPF (971189)

The Metal Viking Presser is a hybrid of the Metal Viking Bencher and the Metal Viking X-Type Bencher. Like its predecessors, it is a single ply shirt made of Viking material with a stretchy back. Unlike the other shirts, though, it has a less severe arm angle. It is designed with the cut of the arms to be between the high grooved, elbows out style of the Viking Bencher and the low grooved, extreme tuck of the Viking X-Type Bencher. It is a happy medium that is proving to be very popular with IPF lifters everywhere. Size 52 fit 75kg lifter £75

INZER HARDCORE SQUAT SUIT
Size 31 fit 75kg lifter £65

INZER BLAST BENCH SHIRT (ORIGINAL)
Size 50 fit 75kg lifter £30

METAL VIKING BENCHER IPF (971181)

The Metal Viking IPF Bencher is made of a very stiff polyester that is great for those with a strong lockout. The sleeves are cut regular, unlike the X-type. IPF approved. Size 50 fit 75kg lifter £60

surples to my requirement so up for sale

might get rid of my brand new never worn katana & titan squat suit (both black bad boy colors)

[suffolkmike]

i have just purchased a katana size 42 and cannott get on with it at all. although i have not benched heavy since nov 06. i currently use a fury 40 and that is better for me. the katana 40 was way too tight on the arms. i am interested in your metal shirts hellspawn. would you allow me to try them on before purchasing??

[Hellspawn]

i have just purchased a katana size 42 and cannott get on with it at all. although i have not benched heavy since nov 06. i currently use a fury 40 and that is better for me. the katana 40 was way too tight on the arms. i am interested in your metal shirts hellspawn. would you allow me to try them on before purchasing??

Best thing realy Mike is pop down here for a visit if possible you can try out all the shirts etc as they are all very different i just remembered i have an F6 as well thats only been tried on once , i wont be needing any of this stuff when my parcel arrives as this lots redundant the moment i open the magic box ha ha

[suffolkmike]

i wear a size 40 fury at the moment. just got a katana 42 a/s.. tried the 40 but the sleeves really bloody tight . no way i could bench in it. how do the metal sizes compare to the titan hellspawn??

[andyclegg]

METAL VIKING BENCHER IPF - Size 50 fit 75kg lifter £60

Hi, Is this still for sale ? Sounds like it might be a good one for me to try as I've been thinking about upgrading my old-fashioned Inzer Blast Shirt. I'm not full 75kg and have thin-ish arms, so will check measurements tonight to see if it would be good for me.

Andy

[Hellspawn]

Hi, Is this still for sale ? Sounds like it might be a good one for me to try as I've been thinking about upgrading my old-fashioned Inzer Blast Shirt. I'm not full 75kg and have thin-ish arms, so will check measurements tonight to see if it would be good for me.

Andy

yes mate all my kit is for sale (not belts,boots or wraps though) personly i prefer the presser to bencher and have just bought the new king version and ace suit so dont need this lot

[Hellspawn]

i wear a size 40 fury at the moment. just got a katana 42 a/s.. tried the 40 but the sleeves really bloody tight . no way i could bench in it. how do the metal sizes compare to the titan hellspawn??

well most of my shirts were too tight Inzer, Titan and Metal and were all roughly the same size with the exception of the size 52 metal presser which was perfect untill i competed in it last year but i lost about a stone in weight three days before the comp due to getting ill but still competed anyway now its slightly still too big because i have not trained due to shoulder injury , F6 was the best fit untill i tried the metal presser now thats my personal choice i like the low neck line and general fit of it and hopefully the king presser will be even better but still retain the comfort of the original version,
The Katana A/S i found was too extreem in sleeve angle for me not to mention it took 240kg to get a touch down in it and no way to press it back up but the metal presser gives a nice intermediate sleeve angle and i can get my 17" upper arms into the sleeves which was a problem in all the other shirts.
best thing is try them out first

Al

[suffolkmike]

the katana a/s i have tried , it is a monster to get it down. have notmanaged it yet and been up to 160kg so far. i find it really awkward to control. but i am weak as shit at the moment!!!

[andyclegg]

yes mate all my kit is for sale (not belts,boots or wraps though) personly i prefer the presser to bencher and have just bought the new king version and ace suit so dont need this lot

Just had a look at the sizing chart for the metal bench shirts, and I think the 50 would be too big for me, particularly in the arms which seems to be important to get right on these types of shirt. Cheers,

[Hellspawn]

Anyone going to the BWLA British juniors in Dover can pop by the gym and take a look Pavol has a katana S/S size 52 for sale as well , I seldom wear any of my kit for training so its all in mint condition (not that i been able to train much for a while anyway)

[Funky_monkey]

Mike, would you swap the 42 katana for my 44 rage-x?